Lift Gate World

Some even call it a tail gate lift. We do not care what you call it, we are here to help you decide on the right tailgate lift.

Unlike you have ever seen before!

Lift gate World has one goal, to help you find the lift gate or lift gates that fit your wallet and your truck.

Lift gates can make or break your back- literally. Stop working harder and start working smarter with lifts from We have every part ready to ship and we want to make it easy for you to browse by lift gate manufacture or search our site for a lift gate part number. Keep an eye out for manufacturers like Maxon, Waltco, Ultron, Thieman, Leyman, Eagle, Holland and Anthony lift gates.

Choosing the wrong lift gate can leave you spending thousands. When you are looking at getting a lift gate go with a manufacture you trust.

Look for low maintenance ( if any) , durability, weight (weight leads to wear and tear) and price. We like to think looks is also a factor.

Lift gates: Making Life a heap Easier

Most people are acquainted with truck lifts. They’re employed frequently to assist elevate heavy objects that would be troublesome to handle physically. Between manufacturers like Power Hoist 1000 (R), Tommy (R), Maxon (R), Waltco (R) and Eagle (R), there’s a whole range of different truck lifts accessible to serve every and each purpose. Of course, there are a number of additional instances where it’d be beneficial to use one. The multitude of different applications and potentialities are a lot of a lot of diverse than most folks appear to realize.

Here are simply a few examples:

Handicapped individuals can have their lives made a ton easier by using lift gates. The actual device can be fitted to the side or the back of the van. Putting the raise gates on the side could be a lot of convenient in some instances, but it will need the usual wider parking house reserved for the disabled. But, if the mechanism is attached at the rear of the truck, the width of the parking area becomes beside the point.

Individuals and little business homeowners install lift gates on their pickups. It allows you to free up the additional time for a lot of productive work. Makers like Tommy (R) and Power Hoist 1000 create truck bed hoist particularly for smaller vehicles.

When transporting expensive exotic cars, tailgate lifts enable you to keep the car level while being loaded and unloaded – working like an elevator. By eliminating the necessity for ramps, there’s a lot less risk of damage to the underside of the vehicle due to the angles concerned – particularly since most sport cars have little ground clearance. Waltco (R) usually creates lift gates for medium and serious duty solutions, mounted onto larger trucks.

Truck lifts create a huge difference to productivity in things where there is no loading dock out there (like when delivering to a private home), or the on the market loading bay is occupied. Additionally, it eliminates (in many cases) the necessity to attend for a forklift to arrive and assist in unloading heavy items. As such, truck cranes improve the speed and efficiency of delivery, allowing your car to be back on the job sooner.

Essentially, lift gates were designed to reduce the requirement for physical manpower. Some larger objects carry substantial weight, and using truck bed hoist to handle them addresses numerous issues. These problems embrace the necessity for additional personnel, the danger of damaging things being loaded, and the risk of injury to 1 or a lot of of your workers. The added efficiency and productivity justifies the outlay of the installation. Job satisfaction and superior employee retention is a new bonus: Several people are incapable of continually carrying serious objects, and eventually depart the company.

Truck hoist return in all shapes and sizes, and will be tailor created in line with your specific needs. Companies like Maxon (R) have made a wide selection of models, designed for a wide range of applications. Within the case of specific needs, raise gates can be designed to suit your business or personal expectations.


Tommy Gate, Maxon, Interlift, Ultron, Waltco, Used

Lift gate, lift gates, Liftgate, liftgates, Parts


Phoenix, Houston, Los Angeles,Orange County, Sacramento, San Diego, San Francisco, Santa Barbara, Southern California,Colorado, New Haven, Albuquerque, Las Vegas, Augusta, Delaware, Miami, Tampa, West Palm Beach, Dallas, Houston,Austin, Atlanta, Saltlake City, Sioux Falls, Chicago, Indianapolis, Baltimore, Phoenix, Los Angeles, Orange County, St. Louis,Denver, New Hampshire, Manchester, Nashua, New Jersey, New Haven, Albuquerque, Santa Fe,Los Vegas, Maine, Miami,Tampa, Palm Beach, Dallas, Houston, Austin, Atlanta, Salt Lake City, Sioux Falls, Chicago, Indianapolis, Saltlake City,Chicago, Indianapolis, New York City, Rochester, St. Louis, Ontario, Portland, Las Vegas, Atlantic City, New Jersey, New Mexico, Las Vegas, Long Island, New York City, Rochester, New Hampshire, Manchester, Nashua,Oklahaoma City, Ontario,Portland, Arlington, Richmond, Arlington, Richmond, Seattle

All rights reserved, liftgate,liftgates,lift gate,lift gates. All Brand Names, Manufacturer Names, Marks, trademarks and Logos, such as Tommy Gate, Ultron, Thieman, Maxon, Waltco,Anthony,Leyman, displayed on this site are the property of their respective owners.

Follow me on Twitter

40 Responses to Lift Gate World

  • stuart says:

    hello – I have a Waltco 1,000lb lifting tailgate on my 1993 GMC 3500. A freind wants to buy the truck and sell the lifting tailgate to put a camper on the back.

    How much roughly would the tailgate be worth?

  • Mike Redding says:

    I’m looking for a tommy Gate G2-60-1542 EA48 55″ x 48″ aluminum 1500lb. I have a 3/4 ton 2003 ford f-250, 7.3 liter standard axle truck.

  • george via says:

    need a liftgate for GMC or Chevy 14ft box truck that fits a 2000 model

  • Jenny Smith says:

    SEO Hi,

    We can fairly quickly promote your website to the top of the search rankings with no long term contracts!

    We can place your website on top of the Natural Listings on Google, Yahoo and MSN. Our Search Engine Optimization team delivers more top rankings then anyone else and we can prove it. We do not use “link farms” or “black hat” methods that Google and the other search engines frown upon and can use to de-list or ban your site. The techniques are proprietary, involving some valuable closely held trade secrets.

    Our prices are less then half of what other companies charge.
    We would be happy to send you a proposal using the top search phrases for your area of expertise. Please contact me at your convenience so we can start saving you some money.

    In order for us to respond to your request for information, please include your company’s website address (mandatory) and /or phone number.


    Jenny Smith

    SEO – PPC – SMO – Link Building – Copyright – Web Designing With Mobile Compatible – PHP

  • bao moi says:

    Everything is very open with a really clear description of the challenges.
    It was really informative. Your site is extremely helpful.
    Thank you for sharing!

  • Dany Castillo says:

    I have a 2006 Dodge Sprinter 3500 and I need a lift gate for it. I don’t want to invest much but I know that a proper liftgate will cost some money. If there is a used one that can lift up to 2,000 lbs., please let me know asap.

  • adam says:

    We have a Tommy Gate 911046. The tube on the hinge cracked. Tommy Gate over the phone tells us we need these parts
    – Center Support Tube part # 010930
    – Hinge Tub part # 6432
    We could try and find a welder but maybe you have additional parts that we could also purchase that just require it to be fixed? Also, what would be the cost for a new gate same dimensions (to fit truck) but longer out. We have pallets 40×65 we want to move.

  • I am really enjoying the theme/design of your weblog.
    Do you ever run into any browser compatibility problems? A few of my
    blog visitors have complained about my blog not operating correctly in Explorer but looks great in Opera.
    Do you have any advice to help fix this problem?

  • Diego Munayco says:

    Looking to buy 5 MAXON TE-33 Tuk-A-Way. Please respond with any suggestion.

  • Diego Munayco says:

    Trying to buy 5 MAXON TE-33 Tuk-A-Way. Please respond, anybody?

  • Walter says:

    I have a Maxon GPT aluminum tuck away gate. Need cart stops for it or will trade my flipgate section for one with cart stops plus $

  • Adam says:

    Need a liftgate asap 1,000+ capacity, F-150 truck, call 909-702-2500, located upland ca, i need someone local

  • Adam says:

    I need a liftgate for a f1-50 truck asap with a 1,000+ capacity, please email me, im located in upland ca.

  • gmc financing, inc. AL GARCIA says:

    713-864-8999 need pricing on used liftgate for 06 int`l 24 ft. bx trk. thanks, AL

  • derald mazerac says:

    looking for a liftgate to fit on a 2008 chev 1 ton pickup truck with 8′ bed my cell is 985-397-3984 thanks.

  • Morris Hayes says:

    Need a used lift gate asap. Please give me a call at 804-896-9291.

  • Puis-je vous piquer quelques lignes sur mon blog perso

  • roger jon says:

    please contact me at 956 521 4314 I am in dier need of a used lift gate for a dry van trailer

  • Bobby Wooley says:

    I have a Sprinter Lift Gate that was removed for a smaller liftgate.
    It has been kept in a garage and covered. I can send pictures. May be able to deliver in a short range or if buyer is willing to pay for gas. (and maybe a Happy Meal) It measures 53×53 with an 8″ lip.
    Asking $800 or best offer.

  • bob olson says:

    Call me at 320 815 9898 need lift 1000 pd cap. new or used

  • Tony Liello says:

    Hello, I am looking for a used gate 2500 to 3000 pound to put on a 53 foot great dane trailer. Not sure if I want a rail style or somthing that tucks away. Let me Know asap on what you may have. Needing to get gate on in Jan,

  • Jim t. says:

    I need a used lift gate for a ’07 Dodge Ram 2500 Megacab. Tommy gate model 60-1040 w/folding tread plate, steel or aluminum, or similar other make, no older than 10yrs. Please contact Jim, in Fort Worth, Tx, 76116 @ 817-909-7897.

  • mark ford says:

    I have a royal puv service body with barn type doors installed on a 2000 ford f450. I am looking for a lift gate to fit body also need to be able to be used for towing.

  • Craig Harper says:

    I am looking for a lift gate in the Houston Texas area. the diminsions are 38x 90 please give me a call 281-479-4376

  • Steven says:

    Looking for a used Waltco Model 226 liftgate, please contact me @ 440 785 6713 if you have one.

  • Steve Clark says:

    I have a 16′ box truxk body loaded to the hilt with a lift gate.
    Thieman 1600 cap heater A/C Heater lights 2 dead bolt doors 6 batteries so on . 970-310-3511

  • Camille says:

    Selling used lift gate VMI Ricon.
    Dot-public use lift
    Model: S-Series wheelchair lifts
    Manufacturer rated load for these lifts: 800 lbs
    Used on a Dodge Sprinter 2008/2500 140

  • chris vito says:

    I need a used aluminum tommygate platform. 85″x55″
    Please call with any info 609-226-1588 or email

  • Walter Kohowski says:

    looking for used liftgate for a 48′ dry van, roll-up door, 102 wide. 3,000 -4,000 lb capacity.

  • Erik says:

    I have a Dodge Dakota 2006 X Cab and would like to find a used liftgate/tailgate/hydraulic lift to fit in the tail gate spot.

    Anyhelp appreciated – VA or surrounding best since I want to have it installed by a reputable vendor.

    202 247-6101

  • Dawn Kingston says:

    looking for a liftgate for a 14′ box truck in hampton roads or richmond area.

  • Stan Anderton says:

    Looking for a used or new lift gate for a 2006 Chevy W4500 Flatbed truck near Sacramento, CA

  • steve says:

    We are looking for a lift-gate with approximately 750 lbs. capacity to fit on a 2007 Dodge Sprinter Van, 2500, single tires on the back.

    Can you help?

  • zac says:

    looking for used lift gate to fit 02 chevy 1/2 ton truck ?

  • Chris Skinner says:

    Looking for a used lift gate to go on a year 2000 F-150, 1000 lbs. capacity

    • Ron says:

      Just bought a used 2000 F150 truck with eagle lift. Would consider selling the lift gate. Located in College Station,Texas. Are you interested?

    • Luis Aguiar says:

      Is a used liftgate, it came off a chevy 2500. I,m asking 500.00 for it. Are you still looking to buy one?
      I am in Bakersfield Ca.

Leave a Reply

Your email address will not be published. Required fields are marked *

Leave a comment on the page you are looking to buy or sell a lift gate. Leave a phone number if you want someone to contact you. Book mark the page so you can remove it later if needed. Anyone or company can leave information here as long as it is liftgate related.

Link1 | Link2 | Link3

Copyright © 2017. All Rights Reserved.